The New CP Electronics SPIR-F/C Ceiling Mounted Presence Detector with internal lux sensor

The new CP Electronics SPIR-F/C ceiling mounted presence detector can be easily mounted onto a single gang standard switch box either surface or flush mounting. The CP Electronics SPIRFC presence detector switches are designed to provide automatic control of lighting, heating or ventilation loads. They detect movement using a PIR sensor and turn the load on.

When an area is no longer occupied the load will switch off after an adjustable time out period. An adjustable internal light sensor provides additional energy saving in lighting applications. When an area is occupied lighting is only switched on when the level of natural light is below a preset level. When the SPIRFC ceiling presence detector is first powered up the PIR sensor will always detect immediately regardless of whether the room is occupied.

The SPIRFC Ceiling Presence Detector – Wiring Diagram

The New CP Electronics SPIR-F/C Main Features

  • Ceiling PIR: ceiling mounted presence detector;
  • Energy saving device from CP Electronics;
  • Internal lux sensor; recessed ceiling device;
  • Load taken:
    ~ 16 Amp resistive load;
    ~ 10 Amp incandescent lighting;
    ~ 6 Amp fluorescent lighting;
    ~ 3 Amp compact fluorescent lighting;
    ~ 3 Amp low energy lighting;
    ~ 3 Amp low voltage lighting (switch primary of transformer);
    ~ Fluorescent lighting (max 6 fittings recommended);
    ~ For fluorescent lighting total power factor correction capacitance must not exceed 40microF;
    ~ 3 Amp fans and ventilation equipment;
    ~ Switch SON lighting loads via a contactor;
  • Supply Voltage: 220-240 Volts AC 50 Hz;
  • Time out period: Adjustable 10 seconds to 30 minutes;
  • Full technical details about the CP Electronics SPIR-F/C ceiling presence detector(pdf file);
  • Light Level: Light to dark;
  • Fixing Method: Surface fixing 25mm deep plastic surface mount moulded box. Flush fixing 25mm steel wall box or 32mm deep cavity wall box;
  • Terminal capacity: 4.0mm2;
  • Material: Flame retardant ABS;
  • Class 2 electrical rated;
  • Similar model:
  • From the same range:
    # The CP Electronics SPIR-F energy saving device, PIR presence detector with time delay function;
    # The CP Electronics EBDSPIR-HB-PRM Ceiling Presence Detector with Lux Level Adjustment;
  • Temperature: -10°C to 35°C;
  • Conforms with: EMC-89/336/EEC, LVD-73/23/EEC;
  • Buy online the new CP Electronics SPIR-F/C ceiling presence detector.

This device is one of the many Energy Saving / Energy Management devices from CP Electronics. Check out the Energy Saving section on the blog, or the Time Lag Switches / Occupancy Detectors and Switches sections on our website for more such devices.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.