The Rako Wireless RDT-PILL dimmer is a 250w wall box mounting dimmer for tungsten GLS and tungsten halogen GU10. Designed to fit in a standard UK or European back-box, the Rako RDT-PILL requires no neutral yet has full RF receiving capability and the same programmability as other Rako system components. The “PILL” dimmer is useful for installations where fitting a standard Rako dimmer is difficult like the retro-fitting to control the wall lights.
The Rako “PILL” dimmer can be controlled from any Rako transmitter such as the RCP wallpanels, the RAH hand helds, the timeclocks, etc, and forms an integral part of a Rako scene-set system. Of course, the Rako Wireless PILL dimmer can also be controlled from a simple momentary action switch giving ON/OFF/Raise/Lower control allowing cost effective extra panels. The control from the simple panels still allows the dimmer to be controlled as part of an overall house control system with master Off and macro command response.
The Rako Wireless RDT-PILL – Technical Specs
- A compact 250w RF dimmer designed to be located in a standard UK or European backbox;
- Trailing edge technology for quiet reliable dimming of tungsten GLS and tungsten halogen GU10 style lamps;
- Dimensions: 50 x 50 x 19.5mm;
- Input supply: 230V AC +/-10% 50Hz;
- Weight: 46g; Housing: UL V0 material;
- Climate range: Temperature +2C to +40C;
- Humidity: +5% to 95% non condensing;
- Connections: 2 way screw terminal for mains power, Molex 2 pin socket for auxilary switch;
- Protection: Auto resetting over current protection, Auto thermal shutdown, Voltage surge protection;
- Load types: Incandescent mains voltage lamps, Tungsten halogen GU10 lamps, Not suitable for low voltage lamps;
- 250W Back box dimmer, neutral-less (tungsten or mains voltage halogen only);
- The neutral less design allows for retrofit connection in standard wiring situations;
- Controlled from any Rako RAKOM device or simple contact closure input using a momentary push switch;
- Minimum load: 60w; maximum load: 250w;
- Terminal sizes: 1.5mm2 – Stranded, 2.5mm2 – Solid;
- Standards EMC – EN 5001-1 :1992, Immunity – EN 50082-1 :1997;
- Communication: Rakom coded fm radio, 433.9MHz;
- Memory: Flash memory (non volatile);
- More about the Wiring Diagrams and Installation of the Rako RDT-PILL dimmer;
- Buy online the Rako RDT-PILL dimmer – 250W RF dimmer for the Rako Wireless Controls.
Wiring Details / Wiring Diagram for the Rako RDT-PILL
Read about other Rako Wireless Control Devices via,
- The Rako Wireless Lighting Controls – Scene lighting with the Rako Dimmers;
- The Rako Wireless LED Dimmers, Controlling the LED lighting with Rako;
- The Rako RDL1200-C 1200W Leading Edge Dimmer(Ceiling Mounted);
- The Rako RDL250-L In-Line Dimmer for table and free standing lamps;
- Rako Wireless LED Dimmers – methods of dimming LED lights with the Rako Controls(part one with four methods, and part two with the last four);
- The Rako RLED18-1ACI Single Channel 18w LED Driver for Constant Current LED;