New Heritage Brass range, the Low Profile Styled Cast Plate wiring accessories

Part of the Elite Profile Range, the new Low Profile Plate from Heritage Brass features elegantly styled  low profile cast plates of approximately 5mm projection. The Elite Low profile range is particularly suited to complement the contemporary installations.

These days, every major switches & sockets manufacturer does flat plate, and everyone is used to it – but this particular range from Heritage Brass is a square edge low profile, which protrudes a little farther than the flat plate, just enough not to be too much.  If you don’t have an extremely even plaster, this range will look even smarter on your wall. The look – not as bulky / raised as the stepped/raised plate, and the price – very competitive!

While the low profile plates are of minimal projection, a distinctive raised edge enables them to be easily installed on all wall surfaces including slightly uneven or textured finishes. The depth of most of the back-boxes is 35mm(except the 6A Rocker Switches).

The wide product range in low profile is available in a choice of attractive metal plate finishes like Polished Brass, Polished Chrome, Satin Chrome and Satin Nickel, all with the option of white or black trim/insert. The matching metal rockers, a standard feature, further enhance the appeal of the Elite Low Profile range for sophisticated modern decor schemes.

On our website, we will soon post this entire range, but here are some samples you will soon find:

  • Heritage Brass Elite Low Profile 6 Amp 1 Gang 2 Way Switch with white trim, polished chrome finish(LP02.800PCW);
  • Heritage Brass Elite Low Profile Single 13 Amp Switched Socket with white trim, satin chrome finish(LP03.840SCW);
  • Heritage Brass Elite Low Profile 13 Amp switched fused spur(FCU) with neon and black trim, polished brass finish(LP01.836PBBK);
  • Heritage Brass Elite Low Profile 2 gang 2 way push on/off dimmer, satin nickel finish(400W)(LP05.872/400);
  • Heritage Brass Elite Low Profile 20Amp DP switch with black trim and with neon, satin chrome finish(LP03.806SCBK);
  • Heritage Brass Elite Low Profile 45Amp Switch, single plate, with red rocker and white trim, in polished chrome finish(LP02.863W);
  • Heritage Brass Elite Low Profile Round Pin unswitched 5 Amp 3 pin socket with black trim, in polished brass finish(LP01.895BK);
  • Heritage Brass Elite Low Profile Twin non-isolated socket with white trim, in a satin chrome finish(LP05.822W);
  • Heritage Brass Elite Low Profile 1 gang triplex TV/FM/SAT socket with black trim, in a polished chrome finish(LP02.8616BK);
  • Heritage Brass Elite Low Profile 1 Gang RJ45 socket, data socket, with white trim, in a satin nickel finish(LP05.8968W).

2 comments

  1. Hello

    I am looking to connect to 2 Bose ceiling speakers to a single brushed steel speaker plate ideally with banana sockets which in turn will connect to an amplifier. Please advise the best plate to select?

    Thanks

    Gordon

    1. Thank you for your enquiry. You will need to decide on the finish first, then choose either the 1G or 2G euro plate, to which you need to add either EUROPHO1 (single gang speaker socket) or EUROPHO2 (double gang speakers socket). If you buy one 1G euro plate you match it up with the EUROPHO1, and if 2G euro plate, get the EUROPHO2.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.